On-demand hot water for a single sink or basin
Bring hot water to a kitchen or bathroom sink with the Alva GWH2008L 8L gas water heater. Designed for single-tap use, this compact unit combines a 16kW heat output with an 8L/min water flow specification for targeted hot water delivery without a storage geyser.
Pulse ignition automatically lights the unit when water flows, without a continuously burning pilot light. A digital LED temperature display lets you check the water temperature, while separate gas flow and water flow regulation knobs give you control over the settings.
Features & benefits
- Heat water where you need it: This 8L model is best suited to a kitchen or bathroom sink with a single tap.
- Ignite automatically: Water-activated pulse ignition eliminates the need for a standing pilot light.
- Check temperature at a glance: The digital LED display shows the water temperature.
- Adjust gas and water flow: Dedicated regulation knobs let you control gas flow and minimum-to-maximum water flow.
- Suit high- or low-pressure supplies: Compatible with suitable water pressures from 0.025 to 0.5 MPa.
- Keep the installation compact: Unit dimensions are 17 × 32 × 52 cm.
Important compatibility & installation requirements
Connect to a cold-water supply only. This heater is not intended for use with a mixer-type water tap.
Professional installation by an LPGSA-registered installer is required. Failure to use the required professional installer voids the warranty. This is a Type B, flue-duct appliance listed for indoor and outdoor use; the installer must determine suitable placement and flue arrangements in accordance with the appliance instructions.
Read and understand the instruction manual before use, and always operate the appliance according to its instructions. Do not modify any part of the appliance. For product support, call 0860 100 2582 or visit www.alva.co.za.
Technical specifications
- Brand: Alva
- Model / SKU: GWH2008L
- Model size: 8L
- Recommended application: Single-tap kitchen or bathroom sink
- Heat output: 16kW
- Water input / flow specification: 8 L/min
- Suitable water pressure: 0.025–0.5 MPa
- Gas consumption: 1.25 kg/hr at maximum
- Operating gas pressure: 2.8 kPa
- Ignition: Pulse ignition
- Ignition power supply: 2 × D batteries, not included
- Display: Digital LED temperature display
- Controls: Gas flow and water flow regulation knobs
- Exhaust discharge: Flue duct type; flue not included
- Water heater type: B, for indoor and outdoor use subject to installation requirements
- Gas hose specification: SANS 1156, 8mm; not included
- Jet size: 0.71mm each
- Recommended cylinder size: 9kg and above
- Regulator: Not supplied
- Unit dimensions: 17 × 32 × 52 cm
- Unit weight: 6.08kg
- Shipping dimensions: 60 × 36 × 23 cm (L × W × H)
- Shipping weight: 7.08kg
- Listed approval: LPGSA approved, in accordance with SANS 1539, SANS 1237 and SANS 1156 (appliance and hose)
What's in the box
- 1 × 8L gas water heater
- 2 × Wall mounting screws
- 1 × Water hose connector fitting
- 1 × Assembly instructions
Required items not included
- 2 × D batteries
- Flue duct; Alva flue code BA185 is sold separately
- SANS 1156 8mm gas hose
- Gas regulator
Warranty
Includes a 12-month warranty, subject to professional installation by the required LPGSA-registered installer. Failure to meet this installation requirement voids the warranty.
