On-demand hot water for a single tap sink, bath or basin
Bring convenient hot water to your daily routine with the Alva GWH2012L 12L gas water heater. Recommended for a single tap sink, bath or basin, this 24kW model heats water on demand without a storage geyser, with a listed water flow specification of 12L/min.
Pulse ignition automatically lights the unit when water flows, without a continuously burning pilot light. Check the water temperature on the digital LED display and adjust the dedicated gas flow and water flow regulation knobs to suit your requirements within the appliance's operating limits.
Features & benefits
- Heat water for a single outlet: The 12L model is recommended for a single tap sink, bath or basin, including single-bathroom applications.
- Start heating automatically: Water-activated pulse ignition removes the need for a standing pilot light.
- Read the temperature at a glance: The digital LED display shows the water temperature.
- Adjust gas and water flow: Separate control knobs regulate gas flow and minimum-to-maximum water flow.
- Accommodate high- or low-pressure supplies: Suitable water pressure ranges from 0.025 to 0.5 MPa.
Important compatibility & installation requirements
Connect to a cold-water supply only. This heater is not intended for use with a mixer-type water tap.
Professional installation by an LPGSA-registered installer is required. Failure to use the required professional installer voids the warranty. This is a Type B, flue-duct appliance listed for indoor and outdoor use; suitable placement and flue arrangements must be assessed by the installer in accordance with the appliance instructions.
Before use, read and understand the instruction manual. Always operate the appliance according to its instructions and do not modify any part. For product support, call 0860 100 2582 or visit www.alva.co.za.
Technical specifications
- Brand: Alva
- Model / SKU: GWH2012L
- Model size: 12L
- Recommended application: Single tap sink, bath or basin
- Heat output: 24kW
- Water input / flow specification: 12 L/min
- Suitable water pressure: 0.025–0.5 MPa
- Gas consumption: 1.78 kg/hr at maximum
- Operating gas pressure: 2.8 kPa
- Ignition: Pulse ignition
- Ignition power supply: 2 × D batteries, not included
- Display: Digital LED temperature display
- Controls: Gas flow and water flow regulation knobs
- Exhaust discharge: Flue duct type; flue not included
- Water heater type: B, for indoor and outdoor use subject to installation requirements
- Gas hose specification: SANS 1156, 8mm; not included
- Jet size: 0.71mm each
- Recommended cylinder size: 9kg and above
- Regulator: Not supplied
- Unit dimensions: 17 × 34.5 × 61 cm
- Unit weight: 9.15kg
- Shipping dimensions: 70.5 × 40 × 25 cm (L × W × H)
- Shipping weight: 10.15kg
- Listed approval: LPGSA approved, in accordance with SANS 1539, SANS 1237 and SANS 1156 (appliance and hose)
What's in the box
- 1 × 12L gas water heater
- 2 × Wall mounting screws
- 1 × Water hose connector fitting
- 1 × Assembly instructions
Required items not included
- 2 × D batteries
- Flue duct; Alva flue code BA186 is sold separately
- SANS 1156 8mm gas hose
- Gas regulator
Warranty
Includes a 12-month warranty, subject to professional installation by the required LPGSA-registered installer. Failure to meet this installation requirement voids the warranty.
